The Short Answer BSP (British Standard Pipe) and NPT (National Pipe Thread) are two incompatible threading standards for pneumatic fittings. – BSP: Parallel threads, used in UK, Europe, Australia –…
Read MoreThe Summer Problem: Why Heat Damages Air Systems Compressed air systems hate heat. When temperatures rise, your compressor works harder, moisture builds up faster, and seals wear out quicker. Without…
Read MoreThe Three Questions You Need to Answer Buying the wrong air compressor is expensive. Too small and it can’t keep up with demand. Too large and you’ve wasted money on…
Read MoreThe Problem: Pressure Drops Faster Than It Should If your air compressor stops building pressure or loses it rapidly after the motor shuts off, you’re not alone. This is one…
Read MoreIf you’ve spent any time around compressed air systems — whether you’re maintaining a production line in Kent, commissioning equipment for a customer in the South East, or specifying a…
Read MoreTubing is the unsung element of any compressed air system. Everyone focuses on the valves and fittings, but get the tubing wrong and none of the rest performs as it…
Read MoreWhen you’re specifying fittings for a pneumatic or fluid system, the choice between push-to-connect and compression fittings comes up again and again. Both make good connections. Both are widely used.…
Read MorePneumatic fittings are the connectors that join compressed air components together — tubing to valves, cylinders to regulators, manifolds to machines. They might look simple, but get them wrong and…
Read MoreIn any machine or system where pneumatic actuators pose a risk of injury or damage, emergency stop (E-stop) capability must extend to the pneumatic circuit — not just the electrical…
Read MoreCrouzet is a French manufacturer with over 80 years of experience in control components and pneumatics. Their pneumatic product range is particularly well known for miniature and micro valves —…
Read More