How to Heat a Workshop, Unit or Site Office This Winter: SIP Heater Guide
When a workshop, unit or site office is cold, the cost shows up in ways that are easy to miss. People work slower when their hands are cold. Winter brings…
Read MoreA Buyer’s Guide to Air Line Quick Release Couplings
Quick release couplings are the parts that let you swap air tools in a second without shutting the whole system down. They look simple, and most of the time they…
Read MorePush-In or Compression Fittings: Which Should You Use?
Two of the most common ways to join pneumatic tube are push-in fittings and compression fittings. Both do the same basic job of connecting tube to a port or to…
Read MoreFinding and Fixing Compressed Air Leaks
Compressed air is one of the most expensive utilities in a workshop, and leaks are where a lot of that money escapes. A single small leak runs day and night,…
Read MoreUnderstanding FRL Units: Filter, Regulator, Lubricator
An FRL unit — filter, regulator and lubricator — is the air preparation set that sits between your compressor and the tools or machinery it feeds. Compressed air straight from…
Read More5/2 vs 3/2 Solenoid Valves: What’s the Difference?
Directional control valves are the switches of a pneumatic system, and two of the most common you will specify are the 3/2 and the 5/2. They look similar and are…
Read MoreHow to Size a Pneumatic Fitting
Choosing the wrong pneumatic fitting is one of the most common causes of leaks, pressure drop and wasted time on the workshop floor. A fitting has to match three things:…
Read MoreWhy Is My Air Compressor Losing Pressure? A Troubleshooting Guide
The Problem: Pressure Drops Faster Than It Should If your air compressor stops building pressure or loses it rapidly after the motor shuts off, you’re not alone. This is one…
Read MoreHow to Choose the Right Air Compressor for Your Workshop
The Three Questions You Need to Answer Buying the wrong air compressor is expensive. Too small and it can’t keep up with demand. Too large and you’ve wasted money on…
Read MoreKeeping Your Compressed Air System Running in Hot Weather
The Summer Problem: Why Heat Damages Air Systems Compressed air systems hate heat. When temperatures rise, your compressor works harder, moisture builds up faster, and seals wear out quicker. Without…
Read More